Show Snmp Engineid; Show Snmp Filter - Siemens SCALANCE XC-200 Configuration Manual

Network protocols
7.5 SNMP
Syntax
Call the command without parameters:
show snmp community
Result
The details of the configured SNMP communities are displayed.
7.5.1.3

show snmp engineID

Description
This command shows the SNMP identification number of the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp engineID
Result
The SNMP identification number of the device is displayed.
7.5.1.4

show snmp filter

Description
This command shows the configured SNMP filters.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
324
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06