Clear Line Vty - Siemens SCALANCE XC-200 Configuration Manual

Configuration
3.1 System
Further notes
You can display the statistical information of the interfaces with the show interfaces ...
counters command.
3.1.3

clear line vty

Description
With this command, you close a console session on the device.
With the forceful-clear option, you close a session and that is not reacting.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameters:
clear line vty {<line-number(2-9)>|all}[forceful-clear]
The parameters have the following meaning:
Parameter
line-number
all
forceful-clear
Result
The console session is closed.
Further notes
You show the logged-on users with the show users command.
See also
Addresses and interface names (Page 36)
60
Description
Number of the connection that will be
terminated
terminates all connections
closes a session that is not reacting
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
2 ... 9
-
-
Configuration Manual, 07/2017, C79000-G8976-C361-06