No Spanning-Tree Passive-Listening-Compatibility - Siemens SCALANCE XC-200 Configuration Manual

Network structures
6.3 Spanning Tree
You can display the status of this function with the show spanning-tree passive-
listening-compatibilitycommand.
6.3.4.13

no spanning-tree passive-listening-compatibility

Description
With this command you disable the "Enhanced Passive Listening Compatibility" function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no spanning-tree passive-listening-compatibility
Result
The "Enhanced Passive Listening Compatibility" function is disabled.
Further notes
You enable the function with the spanning-tree passive-listening-
compatibility command.
You can display the status of this function with the show spanning-tree passive-
listening-compatibilitycommand.
238
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06