Save Filetype - Siemens SCALANCE XC-200 Configuration Manual

Parameter
port
tcp port
file
filename
filetype
filetype
For information on identifiers of addresses and interfaces, refer to the section "Addresses and
interface names (Page 36)".
Result
The file is loaded on the device from the TFTP server.
Further notes
With the "show loadsave files" command, you can display the file types.
3.2.4

save filetype

Description
With this command, you save files on a TFTP server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
save filetype <filetype> tftp ipv4 <ipv4-address> [port <tcp port
(1-65535)>] file <filename>
The parameters have the following meaning:
Parameter
filetype
filetype
tftp
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Keyword for the port of the server via
which the TFTP connection runs
Number of the port
Keyword for a file name to be assigned -
Name of the file
Keyword for the file type to be loaded
Name of the file type
Description
Keyword for a file type to be loaded
Name of the file type
Keyword for a TFTP server
Configuration
3.2 Load and Save
Range of values / note
-
1 ... 65535
Default: 69
max. 100 characters
-
max. 100 characters
Range of values / note
-
max. 100 characters
-
93