Coordinates Height; Coordinates Latitude - Siemens SCALANCE XC-200 Configuration Manual

3.1.9.5

coordinates height

Description
With this command, you enter a height coordinate.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
coordinates height <meter>
The parameter has the following meaning:
Parameter
meter
Result
The height coordinate is created.
3.1.9.6

coordinates latitude

Description
With this command, you enter a latitude coordinate.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Input box for the height coordinate
Configuration
3.1 System
Range of values / note
max. 32 characters
To use spaces in the entry, enter
the height coordinate in quotes:
coordinates height "123
456"
69