Show Lldp Status; Show Broadcast-Block Config - Siemens SCALANCE XC-200 Configuration Manual

Configuration
3.1 System
3.1.1.13

show lldp status

Description
This command shows per port whether LLDP frames are sent or received.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show lldp status [port {<interface-type> <interface-id>}]
The parameters have the following meaning:
Parameter
port
interface-type
interface-id
For information on identifiers of interfaces and addresses, refer to the section "Addresses and
interface names (Page 36)".
Result
The information is displayed.
3.1.1.14

show broadcast-block config

Description
This command shows the broadcast blocking settings for ports.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
56
Description
Keyword for a port description.
Type or speed of the interface
Module no. and port no. of the interface
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Range of values/note
-
Enter a valid interface.