Diagnostics
12.4 RMON
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
rmon
Default: disabled
Result
The Remote Monitoring function is enabled.
Further notes
You disable this function with the no rmon command.
You can display the status of this function and other information with the show rmon command.
12.4.2.2
no rmon
Description
With this command, you disable the Remote Monitoring function.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no rmon
Default: disabled
Result
The Remote Monitoring function is disabled.
578
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06