Siemens SCALANCE XC-200 Configuration Manual page 160

System time
5.3 SNTP client
The parameters have the following meaning:
Parameter
ucast_addr
For information on names of addresses and interfaces, refer to the section "Addresses and
interface names (Page 36)".
Result
The SNTP unicast server is reset to the default value.
Further notes
You configure the setting with the sntp unicast-server ipv4 command.
You display this setting and other information with the show sntp unicast–mode
status command.
160
Description
Value for an IPv4 unicast address
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values
Enter a valid IPv4 unicast address.
Configuration Manual, 07/2017, C79000-G8976-C361-06