No Login Authentication - Siemens SCALANCE XC-200 Configuration Manual

Security and authentication
11.2 RADIUS client
Syntax
Call up the command with the following parameters:
login authentication {radius | local-and-radius | radius-fallback-
local}
The parameters have the following meaning:
Parameter
radius
local-and-radius
radius-fallback-
local
Result
The authentication is made according to the selected parameter.
Further notes
You disable the authentication via a RADIUS server with the no login authentication
command.
You can display the status of this function and other information with the show device
information command.
11.2.2.2

no login authentication

Description
With this command, you disable authentication via a RADIUS server.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
no login authentication
508
Description
The login is via a RADIUS server.
The login is possible both with the users
that exist in the firmware (user name
and password) and via a RADIUS serv‐
er.
The authentication must be handled via
a RADIUS server.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
-
The local users have priority.
The user is first searched for in the
local database. If the user does not
exist there, a RADIUS query is sent.
A local authentication is performed
only when the RADIUS server can‐
not be reached in the network.
Configuration Manual, 07/2017, C79000-G8976-C361-06