Siemens SCALANCE XC-200 Configuration Manual page 597

Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no monitor session<session-id(1-1)>
The parameter has the following meaning:
Parameter
session-id
Result
The monitor session is deleted.
Further notes
You display the configuration settings with the show monitor session command.
You configure and start mirroring of a port with the monitor session command.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Number of the session
Diagnostics
12.5 Port Mirroring
Range of values / note
1
597