Password - Siemens SCALANCE XC-200 Configuration Manual

Configuration
3.2 Load and Save
delete{showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
Result
The files are displayed or the file is deleted.
Further notes
With the "show loadsave files" command, you can display the file types.
3.2.6.2

password

Description
With this command, you activate and configure the password for a file.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
password {showfiles|filetype<filetype>[pw<password>]}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
pw
password
96
Description
Shows the available files
Keyword for the file type to be deleted
Name of the file type
Description
Shows the available files
Shows that the file type follows that will be loaded
Name of the file type
Keyword for the password
Password
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
-
-
max. 100 characters
Values
-
-
max. 100 characters
-
Enter the password for
the file.
Configuration Manual, 07/2017, C79000-G8976-C361-06