Configure Terminal; Disable - Siemens SCALANCE XC-200 Configuration Manual

3.1.4

configure terminal

Description
With this command, you change to the Global configuration mode.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
configure terminal
Result
You are now in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Further notes
You exit the Global configuration mode with the end command.
3.1.5

disable

With the commands enable and disable you temporarily change the function rights of the
logged in user, the login data remains unchanged.
Description
With this command, you close the Privileged EXEC mode.
You are then in the User EXEC mode.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Configuration
3.1 System
61