No User-Account; Username - Siemens SCALANCE XC-200 Configuration Manual

Security and authentication
11.1 User management
11.1.4.3

no user-account

Description
With this command, you delete a user.
Note
Default users "admin" as well as logged in users cannot be deleted.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no user-account <user-name>
The parameter has the following meaning:
Parameter
user-name
Result
The user has been deleted.
Further notes
You create a user with the user-account command.
You show the created users with the show user-accounts command.
11.1.4.4

username

Description
With this command, you change the password of the factory set default user "admin".
Requirement
You are in the Global Configuration mode.
504
Description
User name
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
Enter a valid user name.
Configuration Manual, 07/2017, C79000-G8976-C361-06