Cos To Queue Mapping - Siemens SCALANCE X-300 Configuration Manual

Configuration using Web Based Management and Command Line Interface
4.5 The Switch menu
Syntax of the Command Line Interface
Table 4- 68
dscpmap [E|D]
bcprio [noforce : <0-7>]
agentprio [noforce : <0-7>]
sched [mode]
4.5.15.2

CoS to Queue Mapping

CoS Queue
Here, CoS priorities are assigned to certain traffic queues.
Figure 4-95 CoS to Queue Mapping
CoS
The order of CoS priorities of the incoming packets.
Queue
The traffic-forwarding queue (send priority) that is assigned the CoS priority.
222
QoS Configuration - CLI\SWITCH\QOS>
Command
Enables/disables DSCP to Queue Mapping.
Specify the priority with which broadcast frames
are sent.
Specify the priority with which agent frames are
sent.
Specifies the scheduling mode.
Description
Configuration Manual, 10/2014, C79000-G8976-C187-22
Comment
Administrator only.
Administrator only.
Administrator only.
Administrator only.
SCALANCE X-300 / X-400