No Password; Tftp Filename - Siemens SCALANCE XC-200 Configuration Manual

Result
The password for the file is configured and activated.
Further notes
You disable the password with the no password command.
3.2.6.3

no password

Description
With this command, you disable the password for a file.
Requirement
You are in the LOADSAVE configuration mode.
The command prompt is as follows:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
no password {showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
Result
The password for the file is disabled.
Further notes
You enable the password for the user certificate with the password command.
3.2.6.4

tftp filename

Description
With this command, you assign a name to a file type.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Shows the available files
Shows that the file type follows that will be loaded
Name of the file type
Configuration
3.2 Load and Save
Values
-
-
max. 100 characters
97