2D Code+
This is a processing item for just FZ3-H
Read in 2D codes.
Processing can also classify the read-in results.
This processing item is for monochrome only.When using a color camera, insert a color gray filter before
2
this processing item.If a color image is input, it is NG (incompatible image).
Used in the Following Case
To classify with 2D codes
●
Important
When FZ3-H
●
processing time from the second time on. Therefore, when measuring the same image, the processing for the
first time after the controller is started up may be longer than the processing time from the second time on.
Settings Flow (2D Code+)
The setting procedure for 2D Code+ is as follows.
268
2D Code+
series high grade controllers.
series dedicated processing items are used, processing is carried out that reduces the
FZ3 Processing Items List Manual