Show Ip Ospf Interface - Allied Telesis x510-28GTX Command Reference Manual

OSPF C
OMMANDS

SHOW IP OSPF INTERFACE

show ip ospf interface
Overview Use this command to display interface information for OSPF.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip ospf interface [<interface-name>]
Mode User Exec and Privileged Exec
awplus#
Examples
Output Figure 27-17: Example output from the show ip ospf interface command
vlan2 is up, line protocol is up
Internet Address 1.1.1.1/24, Area 0.0.0.0, MTU 1500
Process ID 0, Router ID 33.33.33.33, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State Waiting, Priority 1, TE Metric 0
No designated router on this network
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:02
Neighbor Count is 0, Adjacent neighbor count is 0
Crypt Sequence Number is 1106347721
Hello received 0 sent 1, DD received 0 sent 0
LS-Req received 0 sent 0, LS-Upd received 0 sent 0
LS-Ack received 0 sent 0, Discarded 0
C613-50170-01 Rev B
Parameter
<interface-name>
show ip ospf interface vlan2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The VLAN name, for example vlan3.
"Getting Started
Guide.
1060