Mitsubishi Electric GT16 User Manual page 1297

POINT POINT POINT
Ethernet-based driver
®
For using the VNC
• Gateway
• Ethernet Download
• Ethernet (MELSEC), Q17nNC, CRnD-700
• Ethernet (MELSEC), Q17nNC, CRnD-700, Gateway
• Ethernet (FX), Gateway
• Ethernet (OMRON), Gateway
• Ethernet (TOSHIBA nv), Gateway
• Ethernet (YASKAWA), Gateway
• Ethernet (YOKOGAWA), Gateway
• Ethernet/IP (AB), Gateway
• Ethernet (SIEMENS S7), Gateway
• Ethernet (SIEMENS OP), Gateway
• MODBUS/TCP, Gateway
• Ethernet (MICROCOMPUTER)
In the peripheral setting, set [Destination I/F] in [Ethernet Download] for the [PC (Data Transfer)] dialog box.
To connect controllers including a programmable controller to the GOT by using the Ethernet connection, no setting
is required.
For the details of [Ethernet Download] , refer to the following
GT Designer3 Version1 Screen Design Manual (Fundamentals)
65.4 Setting in Personal Computer
®
For connecting the VNC
software to the personal computer to be connected and set it.
Refer to the following for details of the VNC
server, any of the following Ethernet communication drivers must be set on the GOT.
server to the personal computer (VNC
®
client software installation method and setting method.
®
client), it is necessary to install the VNC
65. VNC(R) SERVER CONNECTION
65.4 Setting in Personal Computer
60
61
62
63
64
®
client
65
65 - 3