System Configuration Examples - Mitsubishi Electric GT16 User Manual

61.7 System Configuration Examples

The following shows a system configuration example in the
case of the microcomputer connection (serial).

System Configuration
The system configuration example illustrated below is
explained in this section.
(Microsoft

Communication settings on GOT side and
monitor screen settings
(1) Transmission settings
Set the transmission settings of the GOT.
The transmission settings in the microcomputer
connection (serial) are made at [Detail Setting] on GT
Designer3.
61.6.2 Communication detail settings
Setting item
Transmission Speed
Data bit
Stop bit
Parity
Interrupt Data Byte
Host address (0 to 31)
Format
Special Interrupt Code
Control Method
32bit Storage
IBM-PC/AT-compatible PC
® ®
Visual C++ Ver.6.0)
Setting details
38400bps
8bits
1bit
Even
1 byte
0
1
None
None
LH Order
61. MICROCOMPUTER CONNECTION (SERIAL)
(2) Monitor screen settings
The following shows the monitor screen settings in this
system configuration example.
(a) Common settings
Set D20 to the screen switching device (base
screen).
1.
Select [Common] [GOT Environmental Setting]
[Screen Switching/Window] to display [Environment
Setup] on GT Designer3.
2.
Set D20 to the screen switching device (base screen).
61.7 System Configuration Examples
60
61
62
63
64
65
61 - 67