Setting In Personal Computer - Mitsubishi Electric GOT2000 Series Connection Manual

POINT POINT POINT
Ethernet-based driver
®
For using the VNC
• Gateway
• Ethernet Download
• Ethernet (MELSEC), Q17nNC, CRnD-700, Gateway
• Ethernet (FX), Gateway
• Ethernet (OMRON), Gateway
• Ethernet (KEYENCE), Gateway
• Ethernet (TOSHIBA nv), Gateway
• Ethernet (FUJI), Gateway
• Ethernet (YASKAWA), Gateway
• Ethernet (YASKAWA MP3000), Gateway
• Ethernet (YOKOGAWA), Gateway
• EtherNet/IP (AB), Gateway
• EtherNet/IP (AB Tag), Gateway
• Ethernet (SIEMENS S7), Gateway
• Ethernet (SIEMENS OP), Gateway
• Ethernet (SLMP), Gateway
• MODBUS/TCP, Gateway
• Ethernet (MICROCOMPUTER)
In the peripheral setting, set [Destination I/F] in [Ethernet Download] for the [PC (Data Transfer)] dialog box.
To connect controllers including a programmable controller to the GOT by using the Ethernet connection, no setting
is required.
For the details of [Ethernet Download] , refer to the following
GT Designer3 (GOT2000) Help

When using the wireless LAN
For details of the wireless LAN setting, refer to the following.
19. WIRELESS LAN CONNECTION

14.4 Setting in Personal Computer

®
For connecting the VNC
software to the personal computer to be connected and set it.
Refer to the following for details of the VNC
GT Designer3 (GOT2000) Help
server, any of the following Ethernet communication drivers must be set on the GOT.
server to the personal computer (VNC
®
client software installation method and setting method.
®
client), it is necessary to install the VNC
14. VNC(R) SERVER CONNECTION
14.4 Setting in Personal Computer
®
client
14
14 - 5