GOT-F900 SERIES (CONNECTION)
6.2
Connection to Personal Computer
This section explains the configuration when the created screen data and sequence programs (using
the built-in two-port interface function) are transferred while a personal computer is connected to the
RS-232C port of the GOT-F900.
6.2.1
Screen Data Transfer
GOT-F900
GOT-F900
1) Data transfer cable
a) RS-232C cable
FX-232CAB-1
-
The screen data and sequence program can be transferred using a same cable.
Caution on use of 5 V type F920GOT-K
The F920GOT-K (excluding the 24V type) and the Q Series PLC (CPU direct connection) are connected
via RS-232C ports. Therefore, a power cable needs to be prepared separately by the user when
transferring screen data.
•
Select a cable for connecting personal computers from the table above.
•
The cable to connect QCPU units should be prepared by the user in reference to Cable Diagram in
Chapter 11.
•
For details, refer to Caution on Use of Peripheral Equipment described later.
Handy
GOT
a) RS-232C cable
Personal computer
PC/AT compatible machine
RS-422
QCPU
F920GOT-K
Connection of Peripheral Equipment 6
Personal computer
GT Designer
DU/WIN
RS-232C port shape of personal computer
9-pin D-Sub, male
RS-232C
Personal computer
1
2
3
4
5
6
7
8
9
10
6-3