Operation Using The Keypad; Lcd Monitor, Keys And Led Indicators On The Keypad - Fuji Electric FRENIC-HVAC User Manual

5.3 Operation Using the Keypad

5.3.1

LCD monitor, keys and LED indicators on the keypad

The keypad allows you to run and stop the motor, monitor the running status, specify the function
code data, and monitor I/O signal states, maintenance information, and alarm information.
LCD monitor
Programming keys
Program key
RESET key
UP/DOWN/LEFT/RIGHT
arrow key
1. LED indicators:
2. LCD monitor:
3. Keys:
Figure 5.11 Names and Functions of Keypad Components
These indicators show the current running status of the
inverter.
This monitor shows the following various information
about the inverter according to the operation modes.
These keys are used to perform various inverter
operations.
LED indicators
HELP key
SET key
5-24
Run key (forward)
Run key (reverse)
STOP key
Refer to Table 5.4.
Refer to Figure 5.12
and Table 5.6.
Refer to Table 5.5.