J6 Codes (External Pid Control 2, 3) - Fuji Electric FRENIC-HVAC User Manual

6.3.11 J6 codes (External PID control 2, 3)

J601 External PID Control 2 (Mode selection)
For details of External PID Control 2 (Mode selection), refer to the description of J501.
J602 External PID Control 2 (Remote command selection)
For details of External PID Control 2 (Remote command selection), refer to the description of
J502.
J603 External PID Control 2 (Feedback selection)
For details of External PID Control 2 (Feedback selection), refer to the description of J503.
J605 External PID Control 2 (Display unit)
For details of External PID Control 2 (Display unit), refer to the description of J505.
J606, J607 External PID Control 2 (Maximum scale, Minimum scale)
For details of External PID Control 2 (Maximum scale, Minimum scale), refer to the
description of J506 to J507.
J610 External PID Control 2 P (Gain)
J611
J612
J613
For details of External PID Control 2 (P (Gain), I (Integral time), D (Differential time),
Feedback filter), refer to the description of J510 to J513.
J614 External PID Control 2 (Anti-reset wind-up)
For details of External PID Control 2 (Anti-reset wind-up), refer to the description of J514.
J615 External PID Control 2 (ON/OFF control hysteresis width)
For details of External PID Control 2 (ON/OFF control hysteresis width), refer to the
description of J515.
I (Integral time)
D (Differential time)
Feedback filter
6-245
6.3 Details of Function Codes
(Refer to J501.)
(Refer to J502.)
(Refer to J503.)
(Refer to J505.)
(Refer to J506, J507.)
(Refer to J510.)
(Refer to J511.)
(Refer to J512.)
(Refer to J513.)
(Refer to J514.)
(Refer to J515.)