Initialize Data - Fuji Electric FRENIC-HVAC User Manual

5.6.3.6

Initialize Data

PRG > 2(Function Code) > 6(Initialize)
This returns function code data to the values in the factory-default settings. Changing the data
requires double-key operation (the
following content settings can be made to sub-menu numbers 0 to 12.
Sub-Menu
No.
0 Manually set values
1 Initial values (factory-default
setting values)
2 Initialize Motor 1 parameters
10 Initialize time information
11 Limited initialization
(initialization except for
communication function codes)
12 Limited initialization
(customized logic U code
initialization)
Note: Settings can be made in the same manner for function code H03 (initialize data).
key and the
Sub-Menu
Does not initialize.
Initialize all function codes (initializes to factory-set values).
Initialize in accordance with Motor 1 selection (P99) and motor
capacity (P02).
Initialize date and time.
PRG>1(Start-up)>2(Date/Time) set values are initialized.
Initialize function codes except link functions y01–y20.
Initialize function codes except customized logic U codes.
5-64
key or the key and the
Principal Functions
key). The