5.6.2.2
Function-Specific Initialization
PRG > 1(Start-up) > 2(App Select)
Function-specific initialization allows individual initialization of function codes that are grouped by
application.
Refer to "5.6.3.6 Initialize Data" for details on initialization
5.6.2.3
Date/Time Settings
PRG > 1(Start-up) > 3(Date/Time)
Date and time can be set using a special screen. Setting the data and time also allows time
management of timer operation and alarm history. Display location differs, depending on the
operation mode.
Replacing the backup battery (option) requires setting the date and time again.
1. Adjust date and time
PRG > 1(Start-up) > 3(Date/Time) > 2(Adjust)
Fref
0.00
STOP
Iout
0.00A
PWR
0.03kW
↓
PRG
0.Quick Setup
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
↓
/
PRG>1
1.Language
2.App Select
3.Date/Time
4.Disp Setting
↓
/
PRG>1>3>
1.Disp Format
2.Adjust
3.DST Setting
--/---/----,---
--:--:--
↓
/
Hz
Return to previous screen
1. Press the
key while the running mode
screen is displayed.
2. Use the
/
and confirm with the
3. Use the
/
Date/Time], and confirm with the
4. Use the
/
and confirm with the
5-42
Return to running
keys to select [1. Start-up],
key.
keys to select [3.
key.
keys to select [2. Adjust],
key.