4.4.3
Selecting Option Cards
4.4.3.1
List of option cards, connection ports, and applicable ROM versions
The table below lists the option cards, option connection ports, and applicable ROM versions.
(Function enhancement or version update in the future may provide new options. For options not listed
below, contact Fuji Electric or visit our website.)
Option type
Model name
OPC-RY
Relay output
OPC-RY2
OPC-AIO
I/O
OPC-AO
OPC-PT
OPC-DEV
OPC-COP
OPC-PDP2
Communication
OPC-CCL
OPC-LNW
OPC-ETH
• Two relay output interface cards OPC-RY can be
mounted concurrently.
• The analog interface card OPC-AIO and analog current
output interface card OPC-AO cannot be mounted
concurrently.
Option connection ports
ROM version
A-port B-port C-port
√
√
--
1100 or later
--
√
√
1100 or later
√
√
√
1300 or later
√
√
√
1100 or later
√
√
√
1300 or later
√
√
√
1100 or later
√
--
--
1100 or later
√
--
--
1100 or later
√
--
--
1100 or later
√
--
--
1100 or later
√
--
--
1100 or later
4-52
Remarks
Two option cards connectable at a
time to A- and B-ports (4 outputs).
A single option card connectable to B-
and C-ports (both ports occupied)
A single option card connectable at a
time to any one of A-, B- and C-ports.
A single option card connectable at a
time to any one of A-, B- and C-ports.
A single option card connectable at a
time to any one of A-, B- and C-ports.
Only one of these communications
option cards connectable to the
inverter at a time. (e.g. Connection of
both OPC-DEV and OPC-CCL at a
time is not possible.)
C-port
B-port
A-port
Control circuit
terminal block