Quick Setup; Start-Up - Fuji Electric FRENIC-HVAC User Manual

Main
Menu
3. INV Info: Allows monitoring of inverter operational status.
1
2
3
4
5
4. Alarm Info: Displays alarm information.
1
2
3
5. User Config: Allows any settings to be made.
1
2
6. Tools: Various functions
1
2
3
4
5
6
5.6.1

Quick Setup

PRG > 0(Quick Setup)
In programming mode, menu number 0, "Quick Setup" shows only those function codes
predetermined to have a high usage frequency.
Menu number 5, "User Config" can be used to add or delete function codes from the Quick Setup.
5.6.2

Start-up

PRG > 1(Start-up)
In programming mode, menu number 1, "Start-up" allows display of information needed on startup: the
language displayed on the LCD monitor, data and time settings, and inverter operational status.
Table 5.12 Programming Mode Menus (Continued)
Hierarchy
Sub-Menu
Display
Power monitor PRG>3>1
Operation
PRG>3>2
monitor
I/O check PRG>3>3
Maintenance
PRG>3>4
information
Unit information PRG>3>5
Alarm history PRG>4>1
Light alarm
PRG>4>2
history
Retry history PRG>4>3

Quick setup

PRG>5>1
selection
Password PRG>5>2
PID monitor PRG>6>1
Unit number
PRG>6>2
control monitor
CLogic monitor PRG>6>3
Resonance
PRG>6>4
prevention
Load Factor
PRG>6>5
Measurement
Signal debug PRG>6>6
Principal Functions
Allows monitoring of the estimated amount of power.
Displays operational information.
Displays external interface information.
Displays cumulative run time and other information
used during maintenance.
Allows confirmation of inverter type, serial number
and ROM number.
Lists alarm history (newest + 9 previous). Detailed
information can be confirmed for the four most recent
occurrences.
Lists light alarm history (newest + 5 previous).
Displays retry history (two instances).
Allows function codes to be added to or deleted from
the "0. Quick Setup" display.
Allows setting to prevent inverter function code access
or data revision.
Allows status of PID controls 1 and 2 and external
PID controls 1, 2 and 3 to be monitored. (PV, SV, MV,
etc.)
Allows confirmation of the operational status on the
pump number control.
Previews and debugs customized logic.
During operation, allows jump frequency to be set
while confirming resonance status.
Allows measurement of the operational status of the
maximum output current and average output current.
Allows monitoring and setting of
communication-specific function codes (S, M, W, W1,
W2, W3, X, X1, Z).
5-40