Monitor Multiple Unit Controls - Fuji Electric FRENIC-HVAC User Manual

5.6.7.2

Monitor Multiple Unit Controls

PRG > 6(Tools) > 2(Multi-Op.Mon)
The status of cascade operations and mutual operations can be monitored.
< Cascade operation >
Fref
0.00
STOP
Iout 0.00A
PWR 0.03kW
↓
PRG
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
6.Tools
↓
/
PRG>6
1.PID Monitor
2.Multi-Op. Mon
3.CLogic Monitor
4.Resonant Avd.
5.Load Factor.
6.COM Debug
↓
/
PRG>6>2
Cascade-Fixed
SV 62.3%
PV 91.2%
MV 15.0%
M0 M1 M2 M3
↓
/
PRG>6>2
Cascade-Fixed
SV 0.82
m 3 /min
PV 1.20
m 3 /min
MV 10.00Hz
M0 M1 M2 M3
↓
PRG>6
1.PID Monitor
2.Multi-Op. Mon
3.CLogic Monitor
4.Resonant Avd.
5.Load Factor.
6.COM Debug
Hz
←
Command value
←
Feedback value
← Operation volume (control volume)
←
<Running status>
M0 blinking: Inverter drive;
M2 normal view: Stopped;
←
Command value
←
Feedback value
← Operation volume (control volume)
←
<Running status>
M0 blinking: Inverter drive;
M2 normal view: Stopped;
Return to previous screen
1. Press the key while the running mode
screen is displayed.
2. Use the /
and confirm with the
3. Use the /
Mon], and confirm with the
4. The status of cascade operations can be
confirmed.
M1 ON: Commercial drive;
M3 crossed out: Operation halted
5. Use the /
units and switch to a percentage unit display.
M1 ON: Commercial drive;
M3 crossed out: Operation halted
6. Use the key to return to the menu screen.
5-88
Return to running
keys to select [6. Tools],
key.
keys to select [2. Multi-Op.
key.
M0 blinking: Fire mode
keys to display physical
M0 blinking: Fire mode