Fuji Electric FRENIC-HVAC User Manual page 593

T51 to T70 Timer Operation (Pause date 1) to (Pause date 20)
These function codes specify a maximum of 20 pause dates per year for preventing the
inverter exceptionally from running, e.g., on holidays even if timer operation is enabled. On
pause dates specified, no timer operation is performed even during timer operation period.
It is also possible to enable or disable each pause date setting.
The following two choices of pause date settings are available.
- Setting the month and day (e.g., January 1)
- Setting the day of the week (e.g., January, 2nd Sunday)
Function
code
T51 to T70
*1 The content differs depending upon the setting on bit 3.
 For details, refer to Chapter 5, Section 5.6.3.5 "Configuring timer operation."
Item to be set
Pause day (Month and day)
bit 15 Mode selection
bit 14 --
bit 13 Configuration format
bit 12
bit 11
Month
bit 10
bit 9
bit 8
bit 7
bit 6 Day or week *1
bit 5
bit 4
bit 3
bit 2
Day of the week
bit 1
bit 0
6-283
6.3 Details of Function Codes
Function (Setting range)
0 to 65535
0: Disable pause date setting
1: Enable pause dates setting
-
0: Day of the week, 1: Date
• January to December
• 1st to 31st (when bit 13 = 1 (Date))
• 1st to 4th week, final week
(when bit 13 = 0 (Day of the week))
• Monday to Sunday
(when bit 13 = 0 (Day of the week))