Overview Of Function Codes - Fuji Electric FRENIC-HVAC User Manual

6.1 Overview of Function Codes

6.1 Overview of Function Codes

Function codes enable the FRENIC-HVAC series of inverters to be set up to match your system
requirements.
The function codes are classified into these groups: Fundamental Functions (F codes), Extension
Terminal Functions (E codes), Control Functions (C codes), Motor 1 Parameters (P codes), High
Performance Functions (H and H1 codes), Application Functions 1 (J codes), PID Control 1 (J1 codes),
PID Control 2 (J2 codes), External PID Control 1 (J5 codes), External PID Control 2 and 3 (J6 codes),
Application Functions 2 (d codes), Customizable Logic Functions (U and U1 codes), Link Functions
(y codes), Timer Operation Functions (T codes), Keypad Functions (K codes), and Option Functions
(o codes). To determine the property of each function code, set data to the function code.
This manual does not contain the descriptions of Option Functions (o codes). For o codes, refer to the
instruction manual for each option.
6-1