Fuji Electric FRENIC-HVAC User Manual page 597

Monitor item Monitor name
Motor output Motor output
Analog input
Analog input
(Note 1)
Input watt-hour Input watt-hour
The following monitor items appear only when the related PID control or external PID
control is enabled. Items for the PID control and external PID control being disabled cannot
be displayed.
Table 6.8 Monitor Items (Selectable when PID control or external PID control is enabled)
Monitor item Monitor name
PID command
PID final SV
(Note 2)
PID feedback
PID final PV
amount
(Note 2)
PID output PID MV
(Note 2)
PID control 1
PID1 SV
command
(Note 3)
PID control 1
feedback amount PID1 PV
(Note 3)
PID control 2
PID2 SV
command
(Note 3)
PID control 2
feedback amount PID2 PV
(Note 3)
External PID
control 1 External PID1,
command value final SV
(Note 4)
External PID
External PID1,
control 1 feedback
final PV
amount
(Note 4)
LCD
Unit Meaning of displayed value
indication
M output kW Motor output in kW
An analog input to the inverter in
a format suitable for a desired
scale.
AMon - Refer to function codes below.
Terminal [12]: C59, C60
Terminal [C1]: C65, C66
Terminal [V2]: C71, C72
Input watt
Cumula-
-
tive W
Refer to function code K31 for
details.
LED
Unit Meaning of displayed value
indicator
J105 PID command and its feedback
SV
J205 converted into physical quantities
of the object to be controlled.
The display unit can be selected
PV --
with Function code J105 and
J205.
PID output in %, assuming the
MV % maximum frequency (F03) as
100%
PID control 1 command and its
SV1 --
feedback converted into physical
quantities of the object to be
controlled.
PV1 --
The display unit can be selected
with Function code J105.
PID control 2 command and its
SV2 --
feedback converted into physical
quantities of the object to be
controlled.
PV2 --
The display unit can be selected
with Function code J205.
E. SV1F
E. PV1F
6-287
6.3 Details of Function Codes
Function
code data
for K10
- hour (kWh)
100
Function
code data
for K10
26
27
35
50
51
52
53
54
55
56
60
61