Fuji Electric FRENIC-HVAC User Manual page 259

PRG>2>4>4
KP1=22AR1-4
COM
If a cancel operation screen, error screen or version mismatch screen is displayed, press the
key or the
< Confirm copied data >
PRG > 2(Function Code) > 4(Data Copy) > 5(KP Data Check)
Fref
0.00
Hz
STOP
Iout 0.00A
PWR 0.03kW
↓
PRG
0.Quick Setup
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
↓
/
PRG>2
1.Data Set
2.Data Check
3.Changed Data
4.Data Copy
5.Initialize
↓
/
PRG>2>4
1.KP→INV I.Write
2.KP→INV Read
3.KP→INV Write
4.KP⇔INV Verify
5.KP Data Check
↓
/
The function codes stored in the keypad are not
compatible with the inverter function codes. If no
data is available, the verify error screen is shown
(Note)
key to release. After resetting, the screen returns to programming mode.
1. Press the
screen is displayed.
2. Use the
Code], and confirm with the
3. Use the
Copy], and confirm with the
4. Use the
Check], and confirm with the
5-59
5.6 Programming Mode
.
Return to previous screen
key while the running mode
/ keys to select [2. Function
/ keys to select [4. Data
/ keys to select [KP Data
Return to running
key.
key.
key.