J2 Codes (Pid Control 2) - Fuji Electric FRENIC-HVAC User Manual

6.3.9

J2 codes (PID control 2)

J201 PID Control 2 (Mode selection)
For details about PID control 2 (mode selection) setting, refer to function code J101.
J202 PID
Control
For details about PID control 2 (command selection) setting, refer to function code J102.
J203 PID Control 2 (Feedback selection)
For details about PID control 2 (feedback selection) setting, refer to function code J103.
J205 PID Control 2 (Display unit)
For details about PID control 2 (display unit) setting, refer to function code J105.
J206 PID Control 2 (Maximum scale, Minimum scale)
J207
For details about PID control 2 (maximum scale, minimum scale) setting, refer to function
codes J106 and J107.
J210 PID Control 2 P (gain)
J211
J212
J213
For details about PID control 2 (P, I, D, feedback filter) setting, refer to function code J110 to
J113.
J214 PID Control 2 (Anti-reset wind-up)
For details about PID control 2 (anti-reset wind-up) setting, refer to function code J114.
2 (Command selection)
I (Integral time)
D (Differential time)
Feedback filter
6-215
6.3 Details of Function Codes
(Refer to J101.)
(Refer to J102.)
(Refer to J103.)
(Refer to J105.)
(Refer to J106 and J107.)
(Refer to J110.)
(Refer to J111.)
(Refer to J112.)
(Refer to J113.)
(Refer to J114.)