Fuji Electric FRENIC-HVAC User Manual page 426

Cancel timer -- TMD (Function code data = 190)

Timer 1 to Timer 4 enabled -- TMD1 to TMD4 (Function code data = 191 to 194)

With the combination of TMD1 to TMD4, the inverter outputs the current state of timer
operation.
 Refer to T01 through T19.
Timer operation state
Timer operation disabled (no setting or
being canceled)
Timer operation time invalid
Timer 1
Timer 2
Timer 3
Timer 4
Timers 1 + 2
Timers 1 + 3
Timers 1 + 4
Timers 2 + 3
Timers 2 + 4
Timers 3 + 4
Timers 1 + 2 + 3
Timers 1 + 2 + 4
Timers 1 + 3 + 4
Timers 2 + 3 + 4
Timers 1 + 2 + 3 + 4
Under PID2 control -- PID2 (Function code data = 200)

This output signal comes ON when PID control 2 is selected.
 Refer to J101 and J201.
PID1 alarm -- PV1-ALM (Function code data = 201)

This output signal comes ON when a PID1 alarm occurs.
 Refer to J121, J122, and J124.
PID1 feedback error -- PV1-OFF (Function code data = 202)

This output signal comes ON when a feedback (PV) level error occurs.
 Refer to J127 through J131.
PID2 alarm -- PV2-ALM (Function code data = 203)

This output signal comes ON when a PID2 alarm occurs.
 Refer to J221 through J225.
Output status of external output signals
TMD TMD1
OFF OFF
OFF OFF
ON
OFF
OFF
OFF
ON
ON
ON
ON OFF
OFF
OFF
ON
ON
ON
OFF
ON
6-116
TMD2 TMD3 TMD4
OFF OFF OFF
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
OFF ON OFF
OFF OFF ON
ON OFF OFF
ON
OFF OFF
ON
OFF OFF
ON ON OFF
ON OFF ON
OFF ON ON
ON ON OFF
ON OFF ON
OFF ON ON
ON ON ON
ON ON ON