K Codes (Keypad Functions) - Fuji Electric FRENIC-HVAC User Manual

6.3.17 K codes (Keypad functions)

K01 LCD Monitor (Language selection)
K01 selects the language to be display on the LCD.
- Data setting range: 0 to 19, 100
Data for K01
0
1
2
3
4
5
6
 Language selection can be made easily in Programming mode as follows.
PRG > 1(Start-up) > 1(Language)
For detailed setting procedure, refer to Chapter 5, Section 5.6.2.1 "Setting the display
language."
K02 Backlight OFF Time
K02 specifies the backlight OFF time of the LCD on the keypad.
When no keypad operation is performed during the time specified by K02, the backlight goes
OFF.
- Data setting range: 1 to 30 (min.), OFF
Data for K02
1 to 30 (min.)
 The backlight OFF time can be configured easily in Programming mode as follows.
PRG > 1(Start-up) > 4(Disp Setting) > 1 to 18(Sub menu number)
For detailed setting procedure, refer to Chapter 5, Section 5.6.2.4 "Specifying the
running status item to be monitored."
Language Data for K01
Japanese
English
German
French
Spanish
Italian
Chinese
OFF Always turn the backlight OFF
Turn the backlight OFF automatically after no keypad operation is
performed during the backlight OFF time.
6-284
Language
- -
8 Russian
9 Greek
10 Turkish
11 Polish
12 Czech
13 Swedish
Function
Data for K01 Language
14 Portuguese
15 Dutch
16 Malay
17 Vietnamese
18 Thai
19 Indonesian
User-customized
100
language