Fuji Electric FRENIC-HVAC User Manual page 605

K84 Daylight Saving Time (Start date)
K85 Daylight Saving Time (End date)
K84 and K85 specify the start and end dates of daylight saving time (DST).
- Data setting range: 0000 to FFFF
Data for K84, K85
bit 0-1
bit 2-4
bit 5-7
bit 8-10
bit 11-14
bit 15
 The start and end dates can be specified easily in Programming mode as follows.
PRG > 1(Start-up) > 3(Date/Time) > 2(DST Setting)
For detailed setting procedure, refer to Chapter 5, Section 5.6.2.3 "Setting the
date/time."
Start/end date
Minute (in increments of 15 minutes, 0 to 45 minutes)
Hour (in increments of 1 hour, 0 to 7 hours)
Day/Day of the week
Day/Week; Final week
Month
0: Month and day, 1: Day of the week
6-295
6.3 Details of Function Codes