Fuji Electric FRENIC-HVAC User Manual page 282

↓
/
PRG>5
1.Select Q.Setup
2.Password
↓
/
PRG>5>2
4.Set PW1
6.Set PW2
↓
/
PRG>5>2>4
PW1
0000
↓
/
PRG>5>2>4
PW1
1234
Set PW?
OK
Cancel
↓
/
PRG>5>2>4
Set PW1－1234
If only the password is set, function code data can be revised. To use the password to
prevent function code data from being revised, enable password protection.
3. Use the /
and confirm with the
4. Use the /
the password to be set, [4. Set PW1] or [6. Set
PW2], and confirm with the
5. Use the /
numerical digits, and confirm with the
key.
6. Use the /
confirm with the
7. The set password shown.
Selecting [Cancel] returns to the password
setting screen.
5-82
keys to select [2. Password],
key.
keys to select the number of
key.
keys to select any four
keys to select [OK], and
key.