Fuji Electric FRENIC-HVAC User Manual page 534

(Example 2) When the output level of the external sensor is 0 to 10 VDC:
• Use terminal [12] designed for voltage input.
• When the external sensor's output is of unipolar, the inverter controls the speed within the
range of 0 to 100%.
PID Display Coefficient and Monitoring
To monitor the PID command and its feedback value, set a display unit, maximum scale, and
minimum scale to convert the values into easy-to-understand physical quantities (such as
temperature).
• Function code of display unit, maximum scale, and minimum scale, for each terminal
Terminal [12]
Terminal [C1]
Terminal [V2]
 For the monitor, refer to function code K10.
Display unit Maximum scale
C58
C64
C70
6-224
Minimum scale
C59 C60
C65 C66
C71 C72