Fuji Electric FRENIC-HVAC User Manual page 526

J218 PID Control 2 (Upper limit of PID process output)
J219
For details about PID control 2 (upper and lower limit of PID process output) setting, refer to
function codes J118 and 119.
J221 PID Control 2 (Alarm output selection)
J222
J223
J224
J225
For details about PID control 2 (alarm output selection) setting, refer to function code J121.
J227 PID Control 2 (Feedback failure detection (Mode selection))
J228
J229
J230
J231
For details about PID control 2 (feedback failure detection) setting, refer to function code
J127.
J249 Slow Flowrate Stop Function (Mode selection)
J250
J251
J256
J257
J258
J259
J260
For details about the slow flowrate stop function under PID control 2, refer to the descriptions
of J146 to J160.
(Lower limit of PID process output)
(Upper level alarm (AH))
(Upper level alarm detection hysteresis width)
(Lower level alarm (AL))
(Lower level alarm detection hysteresis width)
(Feedback failure continuation duration)
(Feedback failure upper-limit)
(Feedback failure lower-limit)
(Feedback failure detection time)
(Operation level)
(Elapsed time)
(Initiation inhibition time)
(Cancel frequency)
(Cancel deviation level 1)
(Cancel delay timer)
(Cancel deviation level 2)
6-216
(Refer to J118.)
(Refer to J119.)
(Refer to J121.)
(Refer to J122.)
(Refer to J124.)
(Refer to J127.)
(Refer to J128.)
(Refer to J129.)
(Refer to J130.)
(Refer to J131.)
(Refer to J149.)
(Refer to J150.)
(Refer to J151.)
(Refer to J156.)
(Refer to J157.)
(Refer to J158.)
(Refer to J159.)
(Refer to J160.)