Fuji Electric FRENIC-HVAC User Manual page 283

< Enable Password Protection >
Fref
0.00
Hz
STOP
Iout 0.00A
PWR 0.03kW
↓
PRG
0.Quick Setup
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
↓
/
PRG>5>2
3.PW Protection
6.Set PW2
10.All Clear
↓
PRG>5>2>3
PW Protection is
Not work totally.
Enable protect?
OK
Cancel
↓
/
PRG>5>2
1.Enter PW1
6.Set PW2
10.All Clear
If password protection is on, function code data cannot be revised. The function code data
revision screen displays
Return to previous screen
1. Press the key while the running mode
screen is displayed.
2. Use the /
Config], and confirm with the
3. "3. PW Protection" indicates that password
protection is off (function codes can be
revised). To turn password protection on
(function codes cannot be revised), select "3.
PW Protection" and confirm with the
4. Use the /
confirm with the
By selecting [OK], protection is turned on with
the set password.
.
5-83
5.6 Programming Mode
Return to running
keys to select [5. User
key.
key.
keys to select [OK], and
key.