Fuji Electric FRENIC-HVAC User Manual page 227

Status icons that show the running status, run command sources and various icons
Running status (rotation
direction)
Run command source
Timer operation
PID operation (Internal
PID)
Battery state
Password protection
state
Running status
Running status
HELP that displays help information corresponding to the current screen
(flashing)
LCDs have temperature characteristics. The low temperature slows down the LCD
response; the high temperature makes the screen contrast high so that contrast adjustment
may be needed.
Table 5.6 Icons on the LCD Monitor
Running forward
Running reverse
Keypad
External terminals
Keypad in local mode
Communications link
Running under timer control
(Timer enabled and run command entered)
• Stopped under timer control
(Timer enabled and run command entered)
• PID control being canceled (during running or stop)
• Pause date (during running or stop)
Timer enabled, real-time clock normal, no run command entered
(except during canceling)
Timer operation specified and real-time clock info lost (running
prohibited)
All of terminals [TM1] to [TM4] are OFF (running prohibited)
Internal PID configured and PID1 being selected
(This icon appears even a run command is OFF.)
Internal PID configured and PID2 being selected
(This icon appears even a run command is OFF.)
PID operation stopped temporarily, e.g., due to slow flowrate
(Run command being ON)
PID operation canceled (including boost)
Battery connected and sufficiently charged.
Battery not connected or low battery charge
Inverter being locked (Force to stop, Inoperable)
Locked with password 2 (Access to function codes is prohibited.)
Locked with password 1 (Function code data change is
prohibited.)
Lock being released (Password being canceled)
No run command entered or inverter stopped
Run command entered or during inverter output
Help available
Help being displayed
5-27
5.3 Operation Using the Keypad