Monitor Customized Logic (Clogic) - Fuji Electric FRENIC-HVAC User Manual

5.6.7.3

Monitor Customized Logic (CLogic)

PRG > 6(Tools) > 3(CLogic Monitor)
Customized logic can be previewed and debugged.
Fref
0.00
Hz
STOP
Iout 0.00A
PWR 0.03kW
↓
PRG
1.Start-up
2.Function Code
3.INV Info
4.Alarm Info
5.User Config
6.Tools
↓
/
PRG>6
1.PID Monitor
2.Multi-Op. Mon
3.CLogic Monitor
4.Resonant Avd.
5.Load Factor.
6.COM Debug
↓
/
PRG>6>3[1/14]
Step01:2003
S003 MAX: +5000
+100
+2300
+23.0
[12] MIN: -99.9
↓
PRG>6
1.PID Monitor
2.Multi-Op. Mon
3.CLogic Monitor
4.Resonant Avd.
5.Load Factor.
6.COM Debug
1. Press the
2. Use the
3. Use the
4. Show input/output from Step 1.
<Selection items>
←
Step 01 to 14
The figure at left shows as an example Step01: 2003
(multiplication + upper/lower limits). Inputs: +100, +23;
Limits: Upper limit of +5000, lower limit of -99.9;
Output : 2300 (Multiplication = 100 x 23 = 2300, limit
within scope)
5. Use the
5-91
5.6 Programming Mode
Return to previous screen
key while the running mode
screen is displayed.
/ keys to select [6. Tools],
and confirm with the key.
/ keys to select [3. CLOGIC
Monitor], and confirm with the
The / keys can be used to confirm up
to 14 steps.
key to return to the menu screen.
Return to running
key.