Fuji Electric MICREX-F Series Manual
  1. Manuals
  2. Brands
  3. Fuji Electric Manuals
  4. Controller
  5. MICREX-F Series
  6. Manual

Fuji Electric MICREX-F Series Manual

Programmable controller plc, sio driver
Hide thumbs
Table of Contents

Advertisement

Quick Links

MICREX-F Series
SIO Driver
1
System Configuration....................................................................................................... 3
2
Selection of External Device ............................................................................................ 7
3
Example of Communication Setting ................................................................................. 8
4
Setup Items .................................................................................................................... 24
5
Cable Diagram ............................................................................................................... 29
6
Supported Device........................................................................................................... 44
7
Device Code and Address Code.................................................................................... 46
8
Error Messages.............................................................................................................. 47
1
Fuji Electric Co.,Ltd.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MICREX-F Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Fuji Electric MICREX-F Series

Summary of Contents for Fuji Electric MICREX-F Series

  • Page 1 Fuji Electric Co.,Ltd. MICREX-F Series SIO Driver System Configuration....................... 3 Selection of External Device .................... 7 Example of Communication Setting ................. 8 Setup Items ........................24 Cable Diagram ....................... 29 Supported Device......................44 Device Code and Address Code..................46 Error Messages......................47...
  • Page 2 MICREX-F Series SIO Driver Introduction This manual describes how to connect the Display and the External Device (target PLC). In this manual, the connection procedure will be described by following the below sections: System Configuration "1 System Configuration" (page 3)

  • Page 3: System Configuration

    MICREX-F Series SIO Driver System Configuration The system configuration in the case when the External Device of Fuji Electric Co.,Ltd. and the Display are connected is shown. Setting Example Cable Series Link I/F SIO Type Diagram File Switch Setting Setting...
  • Page 4 MICREX-F Series SIO Driver • 1:n Connection Display RS232C RS422/485 (4wire) RS422/485 (4wire) External Device External Device* External Device* Operation mode:3 Operation mode:3 Operation mode:2 Max 16 units Turn ON the termination resistance switch on the interface which terminates the RS422 connection.
  • Page 5 MICREX-F Series SIO Driver IPC COM Port When connecting IPC with an External Device, the COM port used depends on the series and SIO type. Please refer to the IPC manual for details. Usable port Usable Port Series RS-232C RS-422/485(4 wire)
  • Page 6 MICREX-F Series SIO Driver DIP Switch setting: RS-422/485 (4 wire) DIP Switch Setting Description Reserved (always OFF) SIO type: RS-422/485 Output mode of SD (TXD) data: Always output Terminal resistance (220Ω) insertion to SD (TXD): None Terminal resistance (220Ω) insertion to RD (RXD): None...

  • Page 7: Selection Of External Device

    PLCs display. Manufacturer Select the manufacturer of the External Device to connect. Select "Fuji Electric Co.,Ltd.". Select the External Device model (series) and the connection method. Select "MICREX-F Series SIO". In System configuration, make sure the External Device you are connecting is supported by Series "MICREX-F Series SIO".

  • Page 8: Example Of Communication Setting

    Examples of communication settings of the Display and the External Device, recommended by Pro-face, are shown. When you use the MICREX-F Series, use GP-Pro EX and the ladder software to set as below. Setting Example 1 Settings of GP-Pro EX Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
  • Page 9 MICREX-F Series SIO Driver Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC] window, select the external device and click [Settings] To connect multiple External Devices, from [Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
  • Page 10 MICREX-F Series SIO Driver (5) Create the default file in the data table. Please refer to the manual of the External Device for the default file number or the setting method. When you select MODE2 or 3, use the rotary switch to specify the same number as the station No.
  • Page 11 MICREX-F Series SIO Driver Setting Example 2 Settings of GP-Pro EX Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]...
  • Page 12 MICREX-F Series SIO Driver Setting of External Device Turn ON the DIP switch No.8 "Initialization method" on the rear panel of general-purpose interface module of the External Device. When you perform the settings with the switch, the head code, end code and send condition will be fixed.
  • Page 13 MICREX-F Series SIO Driver Setting Example 3 Settings of GP-Pro EX Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]...
  • Page 14 MICREX-F Series SIO Driver Setting of External Device (1) Turn OFF the DIP switch No.8 "Initialization method" on the rear panel of general-purpose interface module of the External Device. Other settings are not necessary. The DIP switch setting will be effective after restart.
  • Page 15 MICREX-F Series SIO Driver (5) Create the default file in the data table. Please refer to the manual of the External Device for the default file number or the setting method. Use the rotary switch to specify the same number as the station No. in the device setting. Please refer to the connection configuration diagrams for more details.
  • Page 16 MICREX-F Series SIO Driver Setting Example 4 Settings of GP-Pro EX Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]...
  • Page 17 MICREX-F Series SIO Driver Setting of External Device Turn ON the DIP switch No.8 "Initialization method" on the rear panel of general-purpose interface module of the External Device. When you perform the settings with the switch, the head code, end code and send condition will be fixed.
  • Page 18 MICREX-F Series SIO Driver Setting Example 5 Settings of GP-Pro EX Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]...
  • Page 19 MICREX-F Series SIO Driver Setting of External Device Turn ON the DIP switch No.8 "Initialization method" on the rear panel of general-purpose interface module of the External Device. When you perform the settings with the switch, the head code, end code and send condition will be fixed.
  • Page 20 MICREX-F Series SIO Driver Setting Example 6 Settings of GP-Pro EX Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]...
  • Page 21 MICREX-F Series SIO Driver Setting of External Device Turn ON the DIP switch No.8 "Initialization method" on the rear panel of general-purpose interface module of the External Device. When you perform the settings with the switch, the head code, end code and send condition will be fixed.
  • Page 22 MICREX-F Series SIO Driver Setting Example 7 Settings of GP-Pro EX Communication Settings To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC]. Device Setting To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]...
  • Page 23 MICREX-F Series SIO Driver Setting of External Device Perform the communication settings of the External Device in the default file. Create the default file in the data table. Please refer to the manual of the External Device for the default file number or the setting method.

  • Page 24: Setup Items

    MICREX-F Series SIO Driver Setup Items Set communication settings of the Display with GP-Pro EX or in offline mode of the Display. The setting of each parameter must be identical to that of External Device. "3 Example of Communication Setting" (page 8)
  • Page 25 MICREX-F Series SIO Driver Setup Items Setup Description Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving Wait To Send packets to transmitting next commands. Start/End Code Select the start/end code for data.
  • Page 26 MICREX-F Series SIO Driver Setup Items in Offline Mode • Refer to the Maintenance/Troubleshooting guide for information on how to enter offline mode or about the operation. Maintenance/Troubleshooting Guide "Offline Mode" • The number of the setup items to be displayed for 1 page in the offline mode depends on the Display in use.
  • Page 27 MICREX-F Series SIO Driver Setup Items Setup Description Use an integer from 1 to 127 to enter the time (s) for which the Display waits for the Timeout (s) response from the External Device. In case of no response from the External Device, use an integer from 0 to 255 to enter how Retry many times the Display retransmits the command.
  • Page 28 MICREX-F Series SIO Driver Option To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings]. Touch the External Device you want to set from the displayed list, and touch [Option]. Setup Items Setup Description Switch the 9th pin setting when you select RS232C for SIO type.

  • Page 29: Cable Diagram

    MICREX-F Series SIO Driver Cable Diagram The cable diagram shown below may be different from the cable diagram recommended by Fuji Electric Co.,Ltd. Please be assured there is no operational problem in applying the cable diagram shown in this manual.
  • Page 30 MICREX-F Series SIO Driver • 1:1 Connection Display External Device* CA3-CBL232/5M-01 RS232C Set the operation mode on the External Device interface to 1. • 1:n connection RS422 port on Link I/F Shield RS422 port on Link I/F Signal Signal name...
  • Page 31 MICREX-F Series SIO Driver • 1:1 Connection External Device* D-sub 25 pin (plug) D-sub 9 pin (socket) Shield Signal Signal name name Display Set the operation mode on the External Device interface to 1. • 1:n Connection External Device*1*2 RS232 port on Link I/F...
  • Page 32 MICREX-F Series SIO Driver Cable Diagram 2 Display Cable Notes (Connection Port) RS422 cable by Pro-face CA3-CBL422/5M-01 (5m) COM port conversion adapter by Pro-face CA3-ADPCOM-01 GP3000 (COM1) Terminal block conversion adapter by Pro-face AGP-3302B (COM2) CA3-ADPTRM-01 GP-4*01TM (COM1) (COM2) Your own cable...
  • Page 33 MICREX-F Series SIO Driver Only the COM port which can communicate by RS-422/485 (4 wire) can be used. IPC COM Port (page 5) All GP models except GP-3200 series and AGP-3302B All GP4000 models except GP-4100 Series, GP-4*01TM, GP-4201T and GP-4*03T When using a Terminal Block Conversion Adapter (CA3-ADPTRM-01) instead of the RS-422 Terminal Block Conversion Adapter, refer to Cable Diagram 2B.
  • Page 34 MICREX-F Series SIO Driver • 1:1 Connection External Device* Signal name Signal name Display CA3-CBL422/5M-01 *Turn On the termination resistance switch of the External Device, and set the operation mode to 3. • 1:n Connection External Device*2 External Device*1*2 Shield...
  • Page 35 MICREX-F Series SIO Driver • 1:1 Connection Terminal block External Device* Shield Signal name Signal name Display CA3-ADPTRM-01 TERM CA3-ADPCOM-01 Your own cable Turn On the termination resistance switch of the External Device, and set the operation mode to 3.
  • Page 36 MICREX-F Series SIO Driver • 1:1 Connection External Device* Signal name Signal name Display CA3-CBL422-01 CA3-ADPCOM-01 Do not connect the FG terminal of CA3-CBL422-01 to the External Device. * Turn On the termination resistance switch of the External Device, and set the operation mode to 3.
  • Page 37 MICREX-F Series SIO Driver • 1:1 Connection D-sub 9 pin (socket) Shield External Device* Termination Signal Signal resistance name name Display Turn On the termination resistance switch of the External Device, and set the operation mode to 3. 1:n Connection...
  • Page 38 MICREX-F Series SIO Driver • 1:1 Connection Terminal block Shield External Device* Signal name Signal name Display CA3-ADPTRM-01 TERM CA4-ADPONL-01 Your own cable Turn On the termination resistance switch of the External Device, and set the operation mode to 3.
  • Page 39 MICREX-F Series SIO Driver • 1:1 Connection External Device* Signal name Signal name Display CA3-CBL422-01 CA4-ADPONL-01 Do not connect the FG terminal of CA3-CBL422-01 to the External Device. Turn On the termination resistance switch of the External Device, and set the operation mode to 3.
  • Page 40 MICREX-F Series SIO Driver • 1:1 Connection D-sub 9 pin (plug) External Device* Shield Signal name Signal name Display CA4-ADPONL-01 TERMRX Turn On the termination resistance switch of the External Device, and set the operation mode to 3. 1:n Connection...
  • Page 41 MICREX-F Series SIO Driver • 1:1 Connection Terminal block External Device* Shield Signal name Signal name Display TERM PFXZCBADTM1 Your own cable Turn On the termination resistance switch of the External Device, and set the operation mode to 3. •...
  • Page 42 MICREX-F Series SIO Driver Cable Diagram 3 Display Cable Notes (Connection Port) GP3000 (COM1) GP4000 (COM1) ST (COM1) Your own cable LT3000 (COM1) PC/AT All GP4000 models except GP-4100 Series and GP-4203T Only the COM port which can communicate by RS-232C can be used.
  • Page 43 MICREX-F Series SIO Driver Cable Diagram 4 Display Cable Notes (Connection Port) GP3000 (COM1) RS232C cable by Pro-face GP4000 (COM1) CA3-CBL232/5M-01 (5m) ST (COM1) Set the operation mode LT3000 (COM1) on the interface to 1. Your own cable PC/AT All GP4000 models except GP-4100 Series and GP-4203T Only the COM port which can communicate by RS-232C can be used.

  • Page 44: Supported Device

    MICREX-F Series SIO Driver Supported Device Range of supported device address is shown in the table below. Please note that the actually supported range of the devices varies depending on the External Device to be used. Please check the actual range in the manual of your connecting equipment.
  • Page 45 MICREX-F Series SIO Driver The highest bit in the word device corresponds to the bit 0 in the bit device. The lowest bit in the word device corresponds to the bit F in the bit device. <Example> When writing Hex data "0001" in the address WB0002 (word device)

  • Page 46: Device Code And Address Code

    MICREX-F Series SIO Driver Device Code and Address Code Use device code and address code when you select "Device Type & Address" for the address type in data displays. Device Code Device Device Name Address Code (HEX) Input Relay 0080...

  • Page 47: Error Messages

    MICREX-F Series SIO Driver Error Messages Error messages are displayed on the screen of Display as follows: "No. : Device Name: Error Message (Error Occurrence Area)". Each description is shown below. Item Description Error No. Name of External Device where error occurs. Device name is a title of External Device set Device Name with GP-Pro EX.
  • Page 48 MICREX-F Series SIO Driver GP-Pro EX Device/PLC Connection Manual...

This manual is also suitable for:

Micrex-f

Table of Contents

Save PDF