Symbol
Name
CN10
USB port
CN11
Connector for
battery
• Route the wiring of the control circuit terminals as far from the wiring of the main circuit
as possible. Otherwise electric noise may cause malfunctions.
• Fix the control circuit wires with a cable tie inside the inverter to keep them away from
the live parts of the main circuit (such as the terminal block of the main circuit).
Used as a USB port connector (mini B) that connects the inverter to a
computer. This connector enables connection with the inverter support
loader (FRENIC-HVAC Loader).
A connector for an optional battery.
For details, refer to Section 4.5 "Battery."
5-18
Functions