4.4.2
Selecting options for operation and communication
4.4.2.1
External frequency command potentiometer
An external frequency command potentiometer may be used to set the drive frequency. Connect the
potentiometer to control signal terminals [11] through [13] of the inverter as shown in Figure 4.9.
Model: RJ-13 (BA-2 B-characteristics, 1 kΩ)
Note: The dial plate and knob must be ordered as separated items.
Available from Fuji Electric Technica Co., Ltd.
Model: WAR3W (3W B-characteristics, 1 kΩ)
Note: The dial plate and knob must be ordered as separated items.
Available from Fuji Electric Technica Co., Ltd.
Figure 4.9 Dimensions of External Frequency Command Potentiometer and Connection Example
Panel hole size
4-49
4.4 Options