Mitsubishi GOT1000 Series Connection Manual page 56

2 System equipment
(1) GOT
Image No.
Terminal
Bus connection unit
Intermediary
Bus connection unit
*1 About the bus connection unit
GT15-75QBUSL,
GT15-75QBUS2L,
(2) PLC
Image No.
Bus extension connector box
*2 Set the bus extension connector box to the same Stage No. as that of the GOT unit.
For details on the Stage No. setting, refer to the following.
(3) Cable
Image No.
Connection cable
Connection cable
2 - 4
2.1 System Configuration
2.1.1 Connecting to QCPU (Q mode)
Bus extension connector box
When installing the 1st GOT 13.2m or more away from the main base unit, the bus
extension connector box is required.
Name
*1
• For terminal GOT
*1
• For intermediary GOT
GT15-QBUS : Used for a terminal GOT. (Not available for an intermediary GOT.)
GT15-QBUS2
Name
*2
• Unit used for extending
distance between GOT and
base unit
Section 2.2.3 Setting communication interface (Communication settings)
Name
• Between base unit and GOT
• Between bus extension
connector box and GOT
• Between GOTs
GT15-75QBUSL, GT15-75QBUS2L, GT15-QBUS, GT15-QBUS2
GT15-75QBUS2L, GT15-QBUS2
: Used for an intermediary GOT. (Can be used for a terminal GOT.)
A9GT-QCNB
GT15-QC06B(0.6m), GT15-QC12B(1.2m),
GT15-QC50B(5m), GT15-QC100B(10m)
GT15-QC06B(0.6m), GT15-QC12B(1.2m),
GT15-QC50B(5m), GT15-QC100B(10m),
GT15-QC150BS(15m), GT15-QC200BS(20m),
GT15-QC300BS(30m), GT15-QC350BS(35m)
Model name
Model name
Model name
GT15-QC30B(3m),
GT15-QC30B(3m),
GT15-QC250BS(25m),