Mitsubishi GOT1000 Series Connection Manual page 58

2 System equipment
(1) GOT
Image No.
Terminal
Bus connection unit
Intermediary
Bus connection unit
*1 About the bus connection unit
GT15-75ABUSL, GT15-ABUS: Used for a terminal GOT. (Not available for an intermediary GOT.)
GT15-75ABUS2L, GT15-ABUS2: Used for an intermediary GOT. (Can be used for a terminal GOT.)
(2) PLC
Image No.
Bus connector conversion box
(3) Cable
Image No.
Connection cable
Connection cable
Connection cable
Connection cable
*2 GT15-C100EXSS (10m), GT15-C200EXSS (20m) or GT15-C300EXSS (30m) can be also used.
Connect the GT15-C
Connector [COM1]
Connector [COM2]
2 - 6
2.1 System Configuration
2.1.2 Connecting to QnACPU or AnCPU type
Bus connector conversion box
When installing the 1st GOT 6.6m or more away from the main base unit, the bus
connector conversion box is required.
Name
*1
• For terminal GOT
*1
• For intermediary GOT
Name
• Unit used for converting
connection cable connector
and extending distance
between GOT and base unit
Name
• Between base unit and GOT
*2*3*4
• Between bus connector
conversion box and GOT
• Between base unit and bus
connector conversion box
*3
• Between GOTs
EXSS connectors as follows:
PLC CPU side
GOT side
GT15-75ABUSL, GT15-75ABUS2L, GT15-ABUS
GT15-ABUS2
GT15-75ABUS2L, GT15-ABUS2
A7GT-CNB
GT15-C12NB(1.2m), GT15-C30NB(3m),
GT15-C100EXSS-1(10m), GT15-C200EXSS-1(20m),
GT15-C300EXSS-1(30m)
GT15-AC06B(0.6m), GT15-AC12B(1.2m),
GT15-AC30B(3m), GT15-AC50B(5m)
GT15-C07BS(0.7m), GT15-C12BS(1.2m),
GT15-C50BS(5m), GT15-C100BS(10m),
GT15-C200BS(20m), GT15-C300BS(30m)
Model name
Model name
Model name
GT15-C50NB(5m)
GT15-C30BS(3m),