Mitsubishi GOT1000 Series Connection Manual page 37

2 Connection with another manufacture's PLC
Since the GOT can monitor a PLC manufactured by a vendor other than Mitsubishi, the flexible system
configuration is available.
• OMRON PLC (
• KEYENCE PLC(
• SHARP PLC (
• TOSHIBA PLC (
• HITACHI PLC (
• MATSUSHITA PLC (
• YASKAWA PLC (
• YOKOGAWA PLC (
• Allen-Bradley PLC (
• SIEMENS PLC (
3 Connection with devices other than PLCs
The GOT can monitor devices other than PLCs.
Devices
Microcomputer
Temperature controller
Inverter
Servo amplifier
Bar code reader
Printer
CNC
4 Various useful functions
The GOT offers various functions convenient for connection with the PLC CPU.
Devices
Multi-channel function
FA transparent function
Chapter 9 CONNECTION TO OMRON PLC)
Chapter 10 CONNECTON TO KEYENCE PLC )
Chapter 11 CONNECTION TO SHARP PLC)
Chapter 12 CONNECTION TO TOSHIBA PLC)
Chapter 13 CONNECTION TO HITACHI PLC)
Chapter 14 CONNECTION TO MATSUSHITA PLC)
Chapter 15 CONNECTION TO YASKAWA PLC)
Chapter 16 CONNECTION TO YOKOGAWA PLC)
Chapter 17 CONNECTION TO ALLEN-BRADLEY PLC)
Chapter 18 CONNECTION TO SIEMENS PLC)
Application
This type of connection allows data reading/writing to a
virtual device on GOT from a PC, microcomputer board,
PLC, etc. (hereinafter, referred to as host).
Interrupt output is also available from a GOT to a host.
Various kinds of monitoring and parameter change are
available to temperature controller.
Various kinds of monitoring and parameter change are
available to inverter.
Various kinds of monitoring and parameter change are
available to servo amplifiers.
Data read by the bar code reader can be written to the
PLC CPU.
The printing data in GOT can be printable to a PictBrige
Compatible printer.
Various kinds of monitoring and parameter change are
available to CNC.
Application
Installing two or more communication units and
communication drivers in GOT, one GOT can monitor
maximum four FA controllers (PLC CPU, temperature
controller, inverter etc.).
With the GOT connected to a Mitsubishi PLC, a personal
computer can be connected to the GOT and the
sequence programs in the PLC can be read from or
written to the computer via the GOT.
1.1 Connections and Functions Supported by GOT
Reference
Chapter 19 MICROCOMPUTER
CONNECTION
Chapter 20 CONNECTION TO
OMRON TEMPERATURE CONTROLLER
Chapter 21 CONNECTION TO
YAMATAKE TEMPERATURE
CONTROLLER
Chapter 22 CONNECTION TO RKC
TEMPERATURE CONTROLLER
Chapter 23 INVERTER
CONNECTION
Chapter 24 SERVO AMPLIFIER
CONNECTION
Chapter 25 BAR CODE READER
CONNECTION
Chapter 26 PRINTER CONNECTION
Chapter 27 CNC CONNECTION
Reference
Chapter 28 MULTI-CHANNEL
FUNCTION
Chapter 29 FA TRANSPARENT
FUNCTION
1
2
3
4
5
6
7
8
1 - 5