Connection Cables For The Respective Connection; Got Connector Specifications - Mitsubishi GOT2000 Series Connection Manual

1.4 Connection Cables for the Respective Connection

To connect the GOT to a device in the respective connection type, connection cables between the GOT and a device are
necessary.
For cables needed for each connection, refer to each chapter for connection.
1.4.1

GOT connector specifications

The following shows the connector specifications on the GOT side.
Refer to the following table when preparing connection cables by the user.

RS-232 interface
Use the following as the RS-232 interface and the RS-232 communication unit connector on the GOT. For the GOT
side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector specifications
GOT
GT27
GT23
GT15-RS2-9P
GT01-RS4-M
(2) Connector pin arrangement
GT27, GT23, GT15-RS2-9P, GT01-RS4-M

RS-422/485 interface
Use the following as the RS-422/485 interface and the RS-422/485 communication unit connector on the GOT.
For the GOT side of the connection cable, use a connector and connector cover applicable to the GOT connector.
(1) Connector model
GOT
GT27
GT23
GT15-RS4-9S
GT01-RS4-M
GT15-RS4-TE
(2) Connector pin arrangement
GT27, GT23, GT15-RS4-9P, GT01-RS4-M
GOT main part connector
see from the front
1
14-pin (female)
1 - 20
1. PREPARATORY PROCEDURES FOR MONITORING

1.4 Connection Cables for the Respective Connection

Hardware
Connector type
*1
Version
9-pin D-sub (male)
-
inch screw fixed type
-
9-pin D-sub (male)
inch screw fixed type
-
GOT main part connector
see from the front
1 5
6 9
9-pin D-sub (male)
Connector type
9-pin D-sub (female)
M2.6 millimeter screw
fixed type
9-pin D-sub (female)
M2.6 millimeter screw
fixed type
-
8 14
7
Connector model
17LE-23090-27(D4C□)
17LE-23090-27(D3CC)
Connector model
17LE-13090-27(D2AC) DDK Ltd.
17LE-13090-27(D3AC) DDK Ltd.
- SL-SMT3.5/10/90F BOX
Manufacturer
DDK Ltd.
DDK Ltd.
Manufacturer