Led Display Function - Mitsubishi A1SD75M3 User Manual

13 COMMON FUNCTIONS

13.4 LED display function

The AD75 status, control status of each axis, input signal status, etc., can be confirmed
using the LED display on the front of the AD75 main unit.
Monitor the operation condition as required when the AD75 is not operating normally,
etc. (Constant monitoring is possible.)
The details shown below explain about the "LED display function".
(1) LED display position
(2) Display details
(3) Changing the display details
(1) LED display position
The various types of information are displayed on the "17-segment LED" and
"axis display LED" on the front of the main unit.
The display is changed over by the "mode switch".
The following drawing shows the positions of the "17-segment LED", "axis
display LED", and "mode switch".
AD75M3
A
D75M3
AX1
AX2
AX3
MODE
RS-422
AX1
AX3 AX2
17-segment LED
(17-seg LED)
Axis display LED
Mode switch
13 - 7
MELSEC-A
A1SD75M3
A
1SD75M3
AX1
AX2
AX3
AX1
MODE
RS-422
AX2 AX3
A1SD75M3